{"title":"Controller \u0026 Switching","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eShop controller \u0026amp; switching pedals from leading brands such as Boss, Strymon, Electro Harmonix, JHS \u0026amp; more.\u003c\/p\u003e","products":[{"product_id":"little-black-buffer","title":"JHS Little Black Buffer","description":"\u003cp\u003e\u003cstrong\u003eAbout the JHS Little Black Buffer\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e This may be the greatest weapon you didn’t know you needed. For those of us who are a little “pedal happy” there can be some downfall to our tone. When running a pedal board with more than one or two effects pedals something called “capacitance” happens. This natural problem happens due to the amount of cable or line that you signal has to travel through, not to mention bad switching systems in certain pedals. The result is a very audible amount of high-end loss, weak signal, flabby bass and uncharacteristic pickup behavior in guitars.\u003c\/p\u003e \u003cp\u003eAnother problem is the assumption that all “true bypass” is good. This isn’t true and actually can be worse than imagined. This is were the “Little Black Buffer” steps in providing the perfect input impedance to your rig and giving you the final result of clear, natural tone that sounds like your plugged straight into your amp no matter how many pedals you use. Plug your guitar straight into the input then out into your pedal chain.\u003c\/p\u003e \u003cp\u003eNo need for a switch and it runs on any standard 9v supply.\u003c\/p\u003e","brand":"JHS","offers":[{"title":"Default Title","offer_id":54967879270742,"sku":"JHS-LBB","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1488897592-85571700_63d2c07c-2010-4ed8-adeb-d9cfb6ac9fa5.jpg?v=1786544403"},{"product_id":"buffered-splitter","title":"Buffered Splitter","description":"\u003cp\u003e\u003cstrong\u003eAbout the JHS Buffered Splitter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNeed to split your signal? Don’t want to settled for a passive device that will kill your tone and cause signal loss? This is what you need! This little box of magic takes your input signal and splits it into two always-on outputs that are buffered so you don’t loose clarity or tone in any way. Here are some of the uses.\u003c\/p\u003e \u003cp\u003e*Plug your guitar in and use one output to send your clean signal somewhere like a mixer, separate amp, etc... and send the other output through your board like normal.\u003c\/p\u003e \u003cp\u003e*Use one output to send a constant signal to your tuner and the other for your normal chain. This can help you defeat those volume pedal “tuner out” horrors!\u003c\/p\u003e","brand":"JHS","offers":[{"title":"Default Title","offer_id":54967880155478,"sku":"JHS-BS","price":75.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1488897179-38880700_7433f5c6-0e67-41d5-8750-dcedf2b6ef76.jpg?v=1786544403"},{"product_id":"little-black-amp-box","title":"Little Black Amp Box","description":"\u003cp\u003e\u003cstrong\u003eAbout the JHS Little Black Amp Box\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e If your amp has a “send\/return” effects loop simply connect the input to your SEND and the output to your RETURN. You can use the LBAB to saturate your preamp section and get some cranked tube tone at bedroom levels!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJust a few popular amps with “send\/return” effects loop are:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFender Hot Rod Series \u003cbr\u003eFender Blues Deluxe \u003cbr\u003ePeavey Classic Series\u003c\/p\u003e","brand":"JHS","offers":[{"title":"Default Title","offer_id":54967880188246,"sku":"JHS-LBAB","price":59.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1488897838-16971500_241a7349-08bd-43bc-911c-20de37a132f4.jpg?v=1786544403"},{"product_id":"fs-5u-non-latching-control-foot-switch","title":"Boss FS-5U (Non-latching) Control Foot Switch","description":"\u003cp\u003eBoss offers two types of sturdy metal footswitches for different applications. The FS-5U (silver) is a momentary \"unlatch\"-type footswitch, and the FS-5L (black) is a latch-type footswitch with an LED to indicate status. Both footswitches can be connected using ordinary guitar cables. Please consult your owner's manual for compatibility\u003c\/p\u003e","brand":"Boss","offers":[{"title":"Default Title","offer_id":54967886020950,"sku":"BOSS-FS5U","price":45.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1397561037-58009300_83e26376-6fb4-4d06-bc89-597efecff4bb.jpg?v=1786544410"},{"product_id":"miniswitch-external-tap-tempo-boost-switch","title":"Strymon Tap Favorite Switch, External Tap-Tempo Switch","description":"\u003cp\u003e\u003cstrong\u003ePlease Note: This is an update of the Favourite Switch that activates on push, and is able to smoothly activate the Boost on the Strymon Riverside pedal. \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eStrymon; Want to store a preset of your favourite settings on your Brigadier, El Capistan, Lex, or Flint? Or remotely tap tempos for your TimeLine, Mobius or Flint? Add our MiniSwitch and connect to your Strymon pedal with the included 1\/4\" TRS cable. With the MiniSwitch mode enabled, saving and recalling your favourite preset is a snap. When you turn off your MiniSwitch, it reverts back to the current knob states of your pedal. It’s like having two pedals ready to choose from. When using Tap Tempo mode, you can place your TimeLine, Mobius, or Flint anywhere on your pedalboard and tap in your tempos remotely. Perfect for large rigs or boards with pedals fighting for real estate.\u003c\/p\u003e","brand":"Strymon","offers":[{"title":"Default Title","offer_id":54967894835542,"sku":"STRY-MNISW","price":59.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1397570470-32428200_b49617e2-1f92-4796-b640-752718e79b1e.jpg?v=1786544418"},{"product_id":"fs3x-footswitch-pedal","title":"FS3X Footswitch Pedal","description":"\u003cp\u003eThe FS3X provides increased functionality and convenient Hands-free™ control over UP\/DOWN selection of Models, Mode changes, Loop selection, auto START\/STOPS and arms auto record where applicable. Compact and portable its small foot-print takes very little space on stage or in your gig bag. Durable 3 button metal chassis construction. A 10? stereo TRS cable is included with each unit. Get the most out of your DigiTech products while performing or practicing.\u003c\/p\u003e","brand":"Digitech","offers":[{"title":"Default Title","offer_id":54967927013718,"sku":"FS3X","price":30.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1683813189-08401400_ba10d1de-b240-4a9b-902a-19a2dad002d5.jpg?v=1786544453"},{"product_id":"es-8-effects-switching-system-b-stock","title":"ES-8 Effects Switching System (B-STOCK)","description":"\u003cp\u003e\u003cstrong\u003eB-STOCK | This pedal was purchased from Roland Boss and comes with full warranty\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eComes with manual \u0026amp; power supply.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe ES-8 Effects Switching System begins life with a sharp and clear mission: to provide pro and high-end users with cool and creative solutions. The new and innovative ES-8 is a system that represents a major leap “out of the box” from the standard individual stomp box utility. It is a whole new way of providing unprecedented capability without sacrificing sound quality. The ES-8 combines far-reaching flexibility with total freedom of expression. All this, in one cool device.\u003c\/p\u003e \u003cp\u003eNot just another utility tool, the ES-8 kicks down the door to unlimited possibilities in the universe of musical expression. From this day on, the use of stomp boxes will never be the same. Using BOSS’ advanced technology the ES-8 is designed for spontaneity on the stage. So, go ahead. Jump out of the box. Take the plunge into a whole new world of musical expression. Celebrate the birth of the cool at BOSS with the hot new ES-8 Effects Switching System. It’s a total game changer that will take you to places no musician has ever gone before.\u003c\/p\u003e","brand":"Boss","offers":[{"title":"Default Title","offer_id":54968231428438,"sku":"ES-8 B-STOCK","price":585.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1762180149-69795000_96d8c4ca-47ae-4890-b426-4ac868960dda.jpg?v=1786544771"},{"product_id":"signal-blender-stereo","title":"Signal Blender Stereo","description":"\u003cp\u003eThe Old Blood Noise Endeavors Signal Blender Stereo is a flexible routing pedal designed to split, blend, and manage stereo or mono signals with ease. Built in collaboration with 29 Pedals, it offers two stereo effects loops and a clean path, each with independent volume controls and footswitches, making it ideal for creating parallel signal chains or combining multiple sources into one output.\u003c\/p\u003e \u003cp\u003eWith added features like trails switching, phase inversion, and MIDI control, Signal Blender Stereo is ready for advanced setups on stage or in the studio. It supports mono-in to stereo-out operation via an internal dipswitch and uses TRS jacks for seamless stereo integration—all wrapped in a compact, soft-touch design hand-built in Oklahoma.\u003c\/p\u003e","brand":"Old Blood Noise Endeavors","offers":[{"title":"Default Title","offer_id":54968274813270,"sku":"SIGNAL BLENDER STEREO","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1768225390-96425100_38063b38-6e5f-4ffb-b1c6-8d85615939b8.jpg?v=1786544821"},{"product_id":"ab-2-2-way-selector-footswitch-boxed","title":"AB-2 2 Way Selector Footswitch (Boxed)","description":"\u003cul\u003e \u003cli\u003ePre-owned\u003c\/li\u003e \u003cli\u003eCondition: Very Good\u003c\/li\u003e \u003cli\u003eBoxed\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eThis is a pre-owned item and may have signs of use. Photos are of the actual item.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cem\u003eWhilst we do our best to photograph pre-owned items it is not always possible to capture all marks, scratches and blemishes. If an item has any major wear or damage it will be noted in the description.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cem\u003eIf you require further details on the condition feel free to make contact.\u003c\/em\u003e\u003c\/p\u003e","brand":"Boss","offers":[{"title":"Default Title","offer_id":54968320262486,"sku":"PX AB-2","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1771428850-65918100_9143e65f-cb06-4ce7-a929-3e3d0dcdfbd0.jpg?v=1786544856"},{"product_id":"fs-5l-latching-durable-metal-control-foot-switch","title":"Boss FS-5L (Latching) Durable Metal Control Foot Switch","description":"\u003cp\u003eBoss offers two types of sturdy metal footswitches for different applications. The FS-5U (silver) is a momentary \"unlatch\"-type footswitch, and the FS-5L (black) is a latch-type footswitch with an LED to indicate status. Both footswitches can be connected using ordinary guitar cables. Please consult your owner's manual for compatibility.\u003c\/p\u003e","brand":"Boss","offers":[{"title":"Default Title","offer_id":54968372003158,"sku":"BOSS-FS5L","price":49.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1405430049-02731500_f629d803-c51f-4b04-a462-1c9832008708.jpg?v=1786544894"},{"product_id":"ga-fc-guitar-amp-foot-controller","title":"Roland GA-FC Guitar Amp Foot Controller","description":"\u003cp\u003eIf you want to keep your hands on your axe at all times, the GA-FC foot controller lets you drive the GA-212 or GA-112 from the floor.\u003c\/p\u003e \u003cp\u003eIt also allows expansion. Plug in up to two optional Expression pedals* for volume and drive control, and link to additional stacked amps with the Link In\/Out port.\u003c\/p\u003e \u003ch2\u003eDimensions:\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eWidth:392 mm 15-7\/16 inches\u003c\/li\u003e \u003cli\u003eDepth: 81 mm 3-1\/4 inches\u003c\/li\u003e \u003cli\u003eHeight:49 mm 1-15\/16 inches\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*EV-5, FV-500L, and FV-500H are available as optional expression pedals for the GA-FC.\u003c\/p\u003e","brand":"Boss","offers":[{"title":"Default Title","offer_id":54968382128470,"sku":"GA-FC","price":105.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1411048094-24668500_1a4ce8f1-35d2-4beb-90c7-c7868efba3c8.jpg?v=1786544899"},{"product_id":"custom-pedal-boards-mini-buff-pre-owned","title":"Custom Pedal Boards Mini Buff (Pre-Owned)","description":"\u003cul\u003e \u003cli\u003ePre-Owned\u003c\/li\u003e \u003cli\u003eCondition:Very Good\u003c\/li\u003e \u003cli\u003eNo Box\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Affects","offers":[{"title":"Default Title","offer_id":54968492163414,"sku":"PRE-CUSTOM-PEDAL-BOARDS-MINI-BUFF","price":39.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1780131456-95696500_43f91ec2-1b70-48eb-9f24-734f8bf8e5c6.jpg?v=1786544964"},{"product_id":"custom-pedal-boards-dual-buffer-pre-owned","title":"Custom Pedal Boards Dual Buffer (Pre-Owned)","description":"\u003cul\u003e \u003cli\u003ePre-Owned\u003c\/li\u003e \u003cli\u003eCondition:Very Good\u003c\/li\u003e \u003cli\u003eNo Box\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Affects","offers":[{"title":"Default Title","offer_id":54968493015382,"sku":"PRE-CUSTOM-PEDAL-BOARDS-DUAL-BUFFER","price":39.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1780132529-10819300_d748bb31-1165-4a1f-be3f-aa9801769632.jpg?v=1786544965"},{"product_id":"w2-footswitch-channel-selector-pre-owned","title":"W2 Footswitch Channel Selector (Pre-Owned)","description":"\u003cul\u003e \u003cli\u003ePre-Owned\u003c\/li\u003e \u003cli\u003eCondition:Very Good\u003c\/li\u003e \u003cli\u003eNo Box\u003c\/li\u003e \u003c\/ul\u003e","brand":"Stagg","offers":[{"title":"Default Title","offer_id":54968493801814,"sku":"PRE-STAGG-W2-SWITCH","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1780133140-26653500_be28b71f-dc1f-4819-9913-240a34d79538.jpg?v=1786544965"},{"product_id":"m199-tap-tempo-pre-owned","title":"M199 Tap Tempo (Pre-Owned)","description":"\u003cul\u003e \u003cli\u003ePre-Owned\u003c\/li\u003e \u003cli\u003eCondition: Very Good\u003c\/li\u003e \u003cli\u003eBoxed\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThis is a pre-owned item and may have signs of use. Photos are of the actual item.\u003c\/p\u003e \u003cp\u003eWhilst we do our best to photograph pre-owned items it is not always possible to capture all marks, scratches and blemishes. If an item has any major wear or damage it will be noted in the description.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eIf you require further details on the condition feel free to make contact.\u003c\/p\u003e","brand":"MXR","offers":[{"title":"Default Title","offer_id":54968541118806,"sku":"PRE - M199 TAP TEMPO","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1784552138-24559100_2bc44036-d573-49a9-aa18-e09ac7487737.jpg?v=1786545048"},{"product_id":"ab-2-a-b-footswitch-input-output-selector-pedal","title":"Boss AB-2 A\/B Footswitch Input\/Output Selector Pedal","description":"\u003cp\u003eThe BOSS AB-2 is a 2-way selector pedal that makes changing inputs or outputs easy. One stomp is all it takes to instantly switch between 2 guitars or effects setups, change amplifiers or switch between an amp and tuner. Rock-solid BOSS construction ensures the AB-2 will stand the test of time.\u003c\/p\u003e","brand":"Boss","offers":[{"title":"Default Title","offer_id":54968547279190,"sku":"BOSS-AB2","price":47.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1423931803-41507200_3957f72f-93a7-4f2f-a163-2c5f4059ded1.jpg?v=1786545121"},{"product_id":"multiswitch-3-way-footswitch-for-timeline-mobius-or-bigsky-with-trs-cable","title":"Strymon Multiswitch for TimeLine, Mobius or BigSky - With TRS Cable","description":"\u003cp\u003eThe Strymon Multiswitch is a must have add on for anyone with a Timeline, Mobius or Big Sky. It adds on 3 new footswitches to each of these pedals that can be used in a bunch of different ways so you have more control over your sound live.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTimeline Looper Control\u003c\/strong\u003e\u003cbr\u003eThe looper is one of the most used functions on the Timeline but what if you could add more control to your sound? The MultiSwitch adds in three new footswitches that mean you can access the looper anytime you want instead of having to hold down the tap button. You can also use it in the pedals normal loop mode to have a 6 pedal loop station that adds in reverse, half speed and undo\/redo controls so you can add in more tasty cool layers to your sound.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBank Mode\u003c\/strong\u003e\u003cbr\u003eIn Bank Mode which works with the TimeLine, Big Sky and Mobius you can control your banks and presets in a whole new way. Your left button is now a bank down control, the right a bank up while the center control goes between preset A,B and C on each bank.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePreset Mode\u003c\/strong\u003e\u003cbr\u003ePreset mode lets you take more control over your TimeLine, Blue Sky or Mobius with three new controls that are set to preset up, preset down and bypass\/engage so you can select your next preset while playing and when you need to switch just press the middle switch.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTap Mode\u003c\/strong\u003e\u003cbr\u003eTap mode is available on the TimeLine, Blue Sky and Mobius pedals which lets you control your presets and tap tempo with this separate footswitch. This is handy if you only use a select few amount of presets but change timings fequently.\u003c\/p\u003e \u003ch3\u003eHere's what Strymon say about the MultiSwitch\u003c\/h3\u003e \u003cp\u003eWant to unlock the full functionality of TimeLine's looper Or discover a new means of exploring presets on TimeLine, BigSky, or Mobius- Connect MultiSwitch to your TimeLine, BigSky, or Mobius with the included 1\/4\" TRS cable and add a new dimension to your rig.\u003c\/p\u003e","brand":"Strymon","offers":[{"title":"Default Title","offer_id":54968550130006,"sku":"STRY-MULSW","price":99.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1445423163-45372900_2b82aad9-dd00-41fa-9496-0fcacf52ecf3.jpg?v=1786545143"},{"product_id":"red-remote-latching-switch","title":"JHS Red Remote - Latching Switch","description":"\u003cp\u003eUse our new Red Remote with select JHS Pedals to remotely activate the on-board toggle found on the pedal itself. By connecting the Red Remote to a Red Remote equipped pedal with any 1\/4\" instrument cable, this essentially acts as an on-the-fly switcher to give you more tonal options in any setting. The Red Remote is currently compatible with the following JHS Pedals:\u003c\/p\u003e \u003cp\u003eMorning Glory V4\u003c\/p\u003e \u003cp\u003eSuperBolt V2\u003c\/p\u003e \u003cp\u003eTwin Twelve V2\u003c\/p\u003e \u003cp\u003eWhen using the Red Remote, the remote itself will act as the toggle, therefore disabling the pedal's onboard toggle switch. For example, if you have our Red Remote plugged into the SuperBolt, the SuperBolt's \"GAIN\" toggle will be deactivated and the Red Remote will switch the toggle on\/off as you step on the footswitch.\u003c\/p\u003e \u003cp\u003eTo use the Red Remote, plug the remote into the jack of the pedal labeled \"REMOTE...\"  ...this jack will have a red washer to denote it is the appropriate jack to plug the Red Remote into.\u003c\/p\u003e","brand":"JHS","offers":[{"title":"Default Title","offer_id":54968552259926,"sku":"JHS-REDREMOTE","price":45.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1488899171-46261800_e61a1cb0-f3f8-494b-ac87-1f4e193ca62e.jpg?v=1786545155"},{"product_id":"switchblade-plus-channel-selector","title":"Electro Harmonix Switchblade Plus Channel Selector for Guitar Effects Pedals","description":"\u003cp\u003eThe Switchblade+ offers a convenient solution to a player’s switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick.\u003c\/p\u003e","brand":"Electro Harmonix","offers":[{"title":"Default Title","offer_id":54968552554838,"sku":"SWITCHBLADE +","price":45.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1468244916-83677800_33d832e6-89ae-48c5-9f7b-888b323550ba.jpg?v=1786545159"},{"product_id":"mute-switch-guitar-pedal","title":"JHS Mute Switch Guitar Pedal","description":"\u003cp\u003eWith a name like the JHS Pedals Mute Switch, it doesn’t take a rocket surgeon to guess what this little guy does. But in case you’re still curious, it’s a switch that mutes your signal. This latching design lets you immediately cut your signal for silent tuning, breaks between sets, and more. We’d love to go on about this valuable tool...but we’ve pretty much covered it.\u003c\/p\u003e \u003cp\u003eIt turns your signal on and off\u003c\/p\u003e \u003cp\u003eThis Mute Switch mutes your sound. It’s that simple. And yet we think that with its color-changing LED indicator, high-grade components, and convenient compact size, the JHS Pedals Mute Switch does it better than any other.\u003c\/p\u003e \u003cp\u003e- Small size is ideal for saving pedalboard space\u003cbr\u003e- Easy-to-use latching design\u003cbr\u003e- Enjoy absolute silence from everything before it in the chain\u003cbr\u003e- Works great on pedalboards and in effects loops\u003cbr\u003e- LED indicator changes from blue to red to show if the mute is engaged\u003c\/p\u003e \u003cp\u003eNOTE that this is NOT a momentary switch. When clicked, the signal stays in the position chosen.\u003c\/p\u003e \u003cp\u003eThis pedal is passive but requires standard 9V DC Negative for the LED to function and it measures 3.6\"x1.5\"x1\"\u003c\/p\u003e","brand":"JHS","offers":[{"title":"Default Title","offer_id":54968555110742,"sku":"JHS- MUTE SWITCH","price":59.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1502726828-17473900_bc8b19ee-6f89-489b-a076-e5cf04d238a5.jpg?v=1786545187"},{"product_id":"mini-a-b-box","title":"JHS Mini A\/B Box","description":"\u003cp\u003e\u003cstrong\u003eJHS Pedals Mini A\/B Box\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe JHS Pedals Mini A\/B Box is an ultra-compact input or output selector, adding a huge amount of versatility to your setup. Perfect for a wide range of live applications, this pedal can be used to instantly select between two different amps, take your tuner out of your signal chain, switch between two guitars, mute your signal, and much more.\u003c\/p\u003e","brand":"JHS","offers":[{"title":"Default Title","offer_id":54968555241814,"sku":"JHS MINI A\/B","price":55.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1506167843-91723400_143f4f66-2305-4282-ad65-c52bf8d956b4.jpg?v=1786545189"},{"product_id":"active-a-b-y","title":"Active A\/B\/Y","description":"\u003cp\u003eThe JHS Pedals Active A\/B\/Y is the perfect solution when you need to send one signal to two outputs with the ability to choose either output (or both) on the fly.\u003c\/p\u003e \u003cp\u003eJust plug in your instrument cable (or patch cable) into the input, then use the outputs to send signal to any combination of amplifiers, interfaces, mixing board, or anywhere else you want to send your signal.   Once hooked up, use the left footswitch to select between A and B channels. When the LED is red, the A channel is engaged. When the LED is green, the B channel is engaged.  Hit the right “Y” footswitch, and BOTH channels are engaged for full stereo output. Because the Active A\/B\/Y has an output transformer on one of the outputs, there is no need for a ground lift as the transformer eliminates any hum.\u003c\/p\u003e","brand":"JHS","offers":[{"title":"Default Title","offer_id":54968562516310,"sku":"JHS-ABY","price":119.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1547470493-97958400_04cf4db6-2bb7-4176-a75d-dd548dbd8415.jpg?v=1786545226"},{"product_id":"summing-amp-utility-pedal","title":"JHS Summing Amp","description":"\u003cp\u003eThe JHS Pedals Summing Amp gives you the ability to take two inputs and blend them into one output.  Simply plug into the two marked inputs and then plug in your single output and you’re ready to go. From two signals the Summing Amp creates one mono signal.\u003c\/p\u003e \u003cp\u003eThis is perfect for putting effects in parallel so that they are not affected by one another. The Edge used this technique in the 80s with his delays. When you have a quarter note delay and a dotted eighth delay and you place them in parallel then sum them back together, the effect is that both delays come through more clearly and are not “delaying the delays”. This can also be used with overdrives so that they are not pushing each other as in series, but sit atop one another in parallel. Another use is combining fuzz and compression in parallel so the fuzz isn’t getting choked by the compression.\u003c\/p\u003e","brand":"JHS","offers":[{"title":"Default Title","offer_id":54968562549078,"sku":"JHS-SUMMING-AMP","price":85.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1547470620-54744600_32a1d351-8231-458c-8fa8-3df7c60e6143.jpg?v=1786545225"},{"product_id":"switchback","title":"Switchback","description":"\u003cp\u003eThe Switchback has one input, one output and two separate selectable effects loops (Send\/Return), plus an A\/B toggle that is controllable by our Red Remote switching system. The foot-switch is 100% true bypass, so when it’s off, it's not affecting your signal in any way. There are millions of ways to use the Switchback (Maybe not a million but… You get the idea) but here are a few of our favorite applications that are incredibly useful!\u003c\/p\u003e \u003cp\u003e1. An A\/B True Bypass Looper \u003c\/p\u003e \u003cp\u003ePlace a pedal or chain of pedals in the first loop and place a different pedal or chain of pedals in the second loop. The toggle\/red remote will allow you to quickly switch between those two loops. This is great for instantly placing different effects chains in and out of your rig on the fly or for shooting out two pedals with zero dead time in-between playing… Find out if that old TS808 sounds better than your TS-9 :-) if you demo different pedals, this is a must have. \u003c\/p\u003e \u003cp\u003e2. A Simple True Bypass Looper\u003c\/p\u003e \u003cp\u003ePlace your pedal or chain of pedals that you want in the first loop. The toggle\/Red Remote will now toggle between the loop with your effects and the clean bypass signal. There’s no need to bridge the second loop with a patch cable as the Switchback automatically bypasses any loop where there’s nothing plugged in to the jack. \u003c\/p\u003e \u003cp\u003e3. An A\/B Box\u003c\/p\u003e \u003cp\u003eSimply use Send 1 and Send 2 to go to two different amps or any other application where you need two switchable outputs, and don’t use the output. Again, using the Red Remote gives you the ability to switch on the fly while playing!\u003c\/p\u003e \u003cp\u003e4. An Amp Input Switcher\u003c\/p\u003e \u003cp\u003eUse Send 1 to channel one and Send 2 to channel two. This allows you to “channel switch” on any amp with multiple inputs like old Marshalls and Fenders!\u003c\/p\u003e \u003cp\u003e5. An Effects Loop A\/B\u003c\/p\u003e \u003cp\u003ePlug your amp's effects loop Send into the input and the amps return into the output. Then toggle between the two loops of the Switchback as in example #1 above. \u003c\/p\u003e \u003cp\u003eBecause of the red remote function you can place the Switchback and any effects in its loops completely out of sight under your pedal board or in a rack while only having the small 1x1” Red Remote accessible!!! \u003c\/p\u003e \u003cp\u003eThe Switchback could become an essential utility in your touring rig or studio, helping you solve many switching puzzles with your rig. So grab a Switchback and get to climbing!\u003c\/p\u003e","brand":"JHS","offers":[{"title":"Default Title","offer_id":54968562614614,"sku":"JHS-SWITCHBACK","price":103.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1547470662-98747000_53fcedee-f662-4c1f-ae12-953e80a8cef9.jpg?v=1786545227"},{"product_id":"footswitch-for-plus-pedal","title":"Gamechanger Audio Footswitch for Plus Pedal","description":"\u003cp\u003eActing as a kill-switch for your instruments DRY signal (which is useful to have on your board anyway), it lets you build huge drones and then drop your instrument back into the mix with one click.\u003c\/p\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eThis is a special Footswitch that gives you quick and easy access to the PLUS Pedal's “WET only” mode.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row product-content\" style=\"box-sizing: border-box; margin: 70px -10px 0px; padding: 0px; border: 0px; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-stretch: inherit; font-size: 16px; line-height: inherit; font-family: FFDINWebPro, arial, helvetica, sans-serif; vertical-align: baseline; color: #333333;\"\u003e \u003c\/div\u003e","brand":"Gamechanger Audio","offers":[{"title":"Default Title","offer_id":54968575492438,"sku":"GCAFSW","price":49.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1584376358-25799400_e2dd057b-956c-4ac2-95b5-476c5478c311.jpg?v=1786545269"},{"product_id":"expression-ramper-hk","title":"Expression Ramper HK","description":"\u003cp\u003eExpression Ramper allows you to pick two expression settings (A and B) and move between them, either in one motion or as a continuous LFO activated by a footswitch. The mini enclosure size takes up minimal space while creating new sounds out of any pedal with an expression input.\u003c\/p\u003e \u003cp\u003eControls include:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eShape toggle to determine LFO motion (triangle, square, or one-shot)\u003c\/li\u003e \u003cli\u003eAlternate wave shapes accessible via Tap switch (smooth random, sharp random, or one-shot random)\u003c\/li\u003e \u003cli\u003eAssignable knob to set A position, B position, and LFO Rate\u003c\/li\u003e \u003cli\u003eTap switch to set rate via tap tempo\u003c\/li\u003e \u003cli\u003eFootswitch to set expression output in motion, with momentary or latching operation\u003c\/li\u003e \u003cli\u003eInternal configuration for TRS, TRS reverse polarity, and TS configurations, as well as ability to replace built-in 50K digipot with 10K or 100K versions\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor more information, see the Expression Ramper manual available \u003ca href=\"https:\/\/oldbloodnoise.com\/manuals\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003eRequires 9V DC center negative 2.1mm jack power supply capable of 50mA (not included).\u003c\/p\u003e \u003cp\u003eThe art of Expression Ramper is by Holey Kids.\u003c\/p\u003e","brand":"Old Blood Noise Endeavors","offers":[{"title":"Default Title","offer_id":54968600035670,"sku":"OBN-EXRAMP","price":79.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1749548605-12536200_95d04d62-d71e-4ea7-a116-17e5b479cc41.jpg?v=1786545312"},{"product_id":"conduit-midi-hub-for-guitar-effects-pedal-boards","title":"Conduit MIDI Hub for Guitar Effects Pedal Boards","description":"\u003cul\u003e \u003cli\u003eBi-directional TRS MIDI interface\u003c\/li\u003e \u003cli\u003e4 independently-configurable TRS jacks\u003c\/li\u003e \u003cli\u003eSend preset changes to your entire pedalboard!\u003c\/li\u003e \u003cli\u003eBuild presets for each song using all of your pedals\u003c\/li\u003e \u003cli\u003eReady to plug and play with Strymon pedals\u003c\/li\u003e \u003cli\u003eEasily configurable for other pedal types\u003c\/li\u003e \u003cli\u003eLink Conduits together to control more pedals\u003c\/li\u003e \u003cli\u003eUse Conduit as a USB MIDI interface\u003c\/li\u003e \u003cli\u003eQuiet opto-isolated operation\u003c\/li\u003e \u003cli\u003eDesigned and built in the USA\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eSmart MIDI Control Distribution\u003c\/h4\u003e \u003cp\u003eEach of Conduit’s four bi-directional TRS jacks are independently configurable to work with most quarter-inch MIDI equipped pedals. Built-in grounding isolation ensures the quiet operation you expect from Strymon. And for pedals that only need to receive MIDI, Dual Mode allows you to connect two pedals to a single TRS output using an optional TRS splitter cable.\u003c\/p\u003e \u003ch4\u003eUSB MIDI Interface For Your Pedals\u003c\/h4\u003e \u003cp\u003eConduit is designed to be a rock solid USB MIDI interface between your computer and your pedals. Send MIDI control change messages from a sequencer for perfectly synced pedal parameter changes. Automate pedal preset changes, load and save presets, or send SYSEX messages—all from your computer.\u003c\/p\u003e \u003ch4\u003eEasy to Set Up, Easy to Use, Plug In \u0026amp; Go!\u003c\/h4\u003e \u003cp\u003eOut of the box, Conduit’s 1\/4? TRS MIDI jacks are configured to work with Strymon pedals—just plug and go! Other configurations are easily selectable with no DIP switches, no custom cables, and no screwdriver required. Need more TRS MIDI outputs? Just link another Conduit!\u003c\/p\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOne opto-isolated 5-pin DIN MIDI interface (IN and OUT ports)\u003c\/li\u003e \u003cli\u003eFour 1\/4? TRS bi-directional MIDI ports\u003c\/li\u003e \u003cli\u003eFive MIDI status indicator LEDs\u003c\/li\u003e \u003cli\u003eOne USB Type-C to USB-A Male cable\u003c\/li\u003e \u003cli\u003eLightweight, compact anodized aluminum chassis with threaded mounting hardware\u003c\/li\u003e \u003cli\u003eWeight: 5 oz (141 g)\u003c\/li\u003e \u003cli\u003eDimensions: 2.63? deep x 3.5? wide x 1.2? tall (7.2 cm deep x 9 cm wide x 3.8 cm tall)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Strymon","offers":[{"title":"Default Title","offer_id":54968608358742,"sku":"CONDUIT","price":129.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1630664775-64884000_42b38773-e650-4a23-9624-5ecdceae2a84.png?v=1786545329"},{"product_id":"canvas-mono-line-isolator-di-box","title":"CANVAS Mono Line Isolator \u0026 DI Box","description":"\u003cp\u003eThe Canvas Mono is a dual-purpose line isolator and DI box and works by converting your unbalanced signal into a balanced signal for seamless integration with a recording interface or front of house mixing desk. Housed in a familiar stompbox sized chassis, the Canvas Mono fits perfectly on your pedalboard and is fully passive, which means it does not require power! The Canvas Mono features two modes of operation: DI mode and LI mode. DI mode is optimised for high impedance sound sources such as electric guitars or basses. LI mode is designed for low impedance line-level sound sources including amp sims and keyboards. A built-in 15dB input pad (DI mode only) minimises distortion on hotter signals, for complete rig versatility.\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePassive Line Isolator and Direct Injection device\u003c\/li\u003e \u003cli\u003eConverts ¼” unbalanced input to XLR balanced output\u003c\/li\u003e \u003cli\u003eFor interfacing with your recording interface or FOH mixer\u003c\/li\u003e \u003cli\u003eWorks perfectly with amp-in-a-box devices e.g. Walrus Audio ACS1\u003c\/li\u003e \u003cli\u003eStompbox format for easy integration on pedalboards\u003c\/li\u003e \u003cli\u003eFlat frequency response from 20Hz-20kHz\u003c\/li\u003e \u003cli\u003eCustom wound transformers for low THD and full frequency response\u003c\/li\u003e \u003cli\u003eTransformer isolated output\u003c\/li\u003e \u003cli\u003eSum switch turns Thru channel into a second input\u003c\/li\u003e \u003cli\u003ePad: Enabled a -15dB input pad (only in D.I. mode) to minimize distortion\u003c\/li\u003e \u003cli\u003eChoose between DI-or Line-Isolator-Mode\u003c\/li\u003e \u003cli\u003eGND Lift: Isolates GND pin on XLR to reduce hum\u003c\/li\u003e \u003cli\u003ePassive design – no power required\u003c\/li\u003e \u003cli\u003eMade in the USA\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":54968613241174,"sku":"CANVAS MONO","price":145.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/5693\/3206\/files\/1649337311-52909300_8404cc72-25c0-447b-8081-00602e7c7109.png?v=1786545348"}],"url":"https:\/\/soundaffects.com\/collections\/controller-switching.oembed","provider":"Sound Affects","version":"1.0","type":"link"}